8 SPEAKER CONNECTIONS
Use the supplied RCA-type patch cord to
connect the
line-level SUB or LFE output on
your receiver
or amplifier to the SUB input
on the SUB-TS6 subwoofer.
Connect the satellite and center speakers to
the corresponding
speaker terminals on your
receiver or amplifier.
Make sure that you have configured your
surround sound processor for “Subwoofer
On.” The front left/right, center and surround
(rear) speakers should all be set to “Small.”
When all connections have been made, plug
the AC power cord on the subwoofer into
an AC outlet.
SPEAKER CONNECTIONS (cont.)
To Next Page
Loading...
