Harman Kardon TD262 - Page 12

TD262 Specifications
TD212 Specifications
Tape Speed:
1 7/8"/sec.
4.75cm/sec.
Heads: 2
Record/Play Head Type: Amorphous
Frequency Response, — 20dB (IHF std): 20Hz —20kHz ±3dB
all formulations
Typical Large Signal Response (OdB):
20Hz — 20 kHz ± 3dB
w/Dolby C & metal tape
Wow-and-Flutter
(NAB.WRMS):
(DIN):
0.045%
0.07%
Signal-to-Noise Ratio
Dolby off:
57dB
(Cr0 2 ) Dolby B on:
65dB
Dolby C on:
73dB
Total Harmonic Distortion, 1kHz, metal tape, Dolby level: 1.0%
Channel Separation: 45dB
Channel Crosstalk:
70dB
Erase Ratio:
60dB
Bias Frequency: 105 kHz
Fast Forward and Rewind Time: 90 sec (C-60)
Peak Reading Meter Range: — 20dB to +6dB
Output Level, OdB, 10k Ohm load: 480mV
Input Sensitivity (OdB)
Line:
50mV
Input Impedance
Line: 22k Ohms
Dimensions (wxhxd):
17Vs" x 4 1 Vi6" x lO'/i"
443mm x 122mm x 260mm
Weight: 10 lbs/4.5 kg
Tape Speed:
1 7/8"/sec.
4.75cm/sec.
Heads: 2
Record/Play Head Type:
Hard Permalloy
Frequency Response, - 20dB (IHF std): 20Hz - 20kHz ±3dB
w/metal tape
Typical Large Signal Response (OdB): 20Hz-18kHz ±3dB
w/Dolby C & metal tape
Wow-and-Flutter
(NAB, WRMS):
0.05%
(DIN): 0.08%
Signal-to-Noise Ratio
Dolby off:
57dB
(Cr0 2 ) Dolby B on: 65dB
Dolby C on:
73dB
Total Harmonic Distortion, 1kHz, metal tape, Dolby level: 1.0%
Channel Separation:
45dB
Channel Crosstalk: 70dB
Erase Ratio: 60dB
Bias Frequency: 105 kHz
Fast Forward and Rewind Time: 90 sec (C-60)
Peak Reading Meter Range:
- 1 OdB to +5dB
Output Level, OdB, 10k Ohm load:
480mV
Input Sensitivity (OdB)
Line:
50mV
Input Impedance
Line:
22k Ohms
Dimensions (wxhxd):
17%" x 4 l 3 /i 6 " x 9‘/i6"
443mm x 122mm x 230mm
Weight: 8.5 lbs/3.9 kg
Feature and specification subject to change without notice.