Harman Kardon TD262 - Page 2

Safety Precautions
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVIC¬
ING TO QUALIFIED PERSONNEL.
h
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral tri¬
angle is intended to alert the user to the presence
of important operating and maintenance (servic¬
ing) instructions in the literature accompanying
the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
I. Read instructions — all safety and operation instructions
should be read before using the cassette deck.
2. Retain instructions for future reference.
3 ■ Heed warnings — all warnings on the cassette deck and in
its operations instructions should be adhered to.
4 . Follow all instructions.
5. Water and moisture — do not use the cassette deck around
water, for example near a swimming pool, sink or in a wet
basement.
6 ■ Ventilation — The cassette deck should be situated so that
its location or position does not interfere with its proper
ventilation.
7. Heat — The cassette deck should be situated away from
heat sources such as radiators, fireplaces, stoves, electric
popcorn poppers or other appliances that produce heat.
Also avoid prolonged contact with direct sunlight and
extremely low temperatures.
8 > Always use the correct AC voltage - Always connect
the power cord to a domestic mains outlet. Never
connect the unit to an outlet supplying a higher voltage.
This may create a fire hazard.
NOTE FOR CUSTOMERS OTHER THAN CANADA
This unit is supplied with a voltage selector enabling
selection between 220V and 240V on the rear panel. If
the selector is not set to the local voltage, set the
selector to the correct voltage with a screwdriver before
connecting the power cord to a mains outlet.
9 • Power cord protection — Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep¬
tacles and the point at which the cord exits from the ,
cassette deck. Also never pull or stretch the cord.
Cleaning — Do not use volatile solvents such as alcohol,
gasoline, benzine etc. to clean the cassette deck cabinet.
Use only a clean dry cloth. If you must use a wet cloth,
wet only the cloth lightly with water.
I
i
Object and liquid entry — Care should be taken so that
objects (including excessive dust) do not fall into the unit,
and that liquids are not spilled into the inside of the
cassette deck.
2