Need help?Do you have a question about the Harman Kardon TU 980 and is the answer not in the manual?
General| AM band range | 522 - 1620 kHz |
|---|---|
| FM band range | 87.5 - 108 MHz |
| Product color | Black |
| DAB L band range | 1452 MHz |
| DAB III band range | 174 MHz |
| Supported radio bands | AM, DAB, FM |
| Radio Data System (RDS) | Yes |
| Signal-to-Noise Ratio (SNR) | 65 dB |
| Power requirements | 220 - 230V AC, 50/60Hz |
| Power consumption (standby) | 3 W |
| Power consumption (typical) | 11 W |
| Remote control in | 1 |
Weight and Dimensions| Depth | 334 mm |
|---|---|
| Width | 442 mm |
| Height | 63 mm |
| Weight | 3400 g |
Details the TU 980's Dual Band DAB tuner and RDS capabilities, highlighting improved radio reception.
Instructions for connecting analog and digital audio outputs to amplifiers and other audio equipment.
Guidance on connecting FM, AM, and DAB antennas for optimal signal reception.
Covers initial setup, power control, and basic functions for getting started with the TU 980.
Explains how to operate the tuner in DAB mode, including initialization and station scanning.
Describes how to navigate and select stations from the available list after scanning.
Instructions on how to store and recall favorite radio stations using the tuner's memory.
Details the various types of information (DLS, PTY, Time, etc.) available from DAB broadcasts.
Explains how to access and navigate the system's menu structure for various options.
Describes how to change the display order of stations in the list (Alphanumeric or Ensemble).
Guidance on manually tuning and storing stations not found during autotune.
Explains how to check the installed software version of the TU 980 for servicing purposes.
Instructions on setting the DRC level to adjust sound level differences between stations.
Covers Manual Tune, Auto Preset, and recalling preset stations for FM/AM tuning.
Explains the use of Radio Data System, including tuning, display options, and program search.
Provides steps to reset the unit in case of abnormal operation or display issues.
Technical details for the FM tuner, including frequency range, signal-to-noise ratio, and presets.
Technical details for the AM tuner, including frequency range, signal-to-noise ratio, and presets.
Technical specifications for the DAB tuner, covering RF section, display, and audio output.
Overall technical specifications including power requirements and consumption.
Physical dimensions of the unit, including width, height, depth, and weight.
To Next Page
