To Next PageTo Next Page
Need help?Do you have a question about the Harman Stove Company Advance and is the answer not in the manual?
General| Brand | Harman Stove Company |
|---|---|
| Model | Advance |
| Category | Pellet stove |
| Language | English |
Controls heat output based on room sensor for precise temperature maintenance.
Maintains constant heat output regardless of room temperature, ideal for consistent heating.
Steps to safely turn off the stove and allow it to cool down completely.
Step-by-step guide for initial stove ignition and setup.
Information on using a battery backup during power outages for continued operation.
Manual control for room temperature with blower speed adjustment.
Manual control for a large viewing fire with a low sound level.
Procedure for manual ignition of the stove.
Explains blink codes indicating control board or sensor faults.
Specific requirements for installing the stove in a mobile home.
Instructions on how to detach side doors for installation access.
Steps to remove rear shields for access.
Guidance on reattaching rear shields after installation.
Guidance on installing the room temperature sensor for optimal performance.
Instructions for installing the air grill assembly.
Details on pellet vent pipe construction, air space, and installation requirements.
Information on connecting an outside air supply, its benefits, and installation.
Details on the #1 and #2 preferred methods of venting installation.
Instructions for installing the vent into existing chimney or fireplace chimneys (#3, #4).
Details for venting into existing fireplace chimneys (#5, #6).
Specifies clearances and conditions for vent terminal placement.
Procedure for safely removing and reinstalling the ash pan.
Information on soot buildup and the need for venting system cleaning.
Instructions for safely opening and closing the stove's view door.
Steps to detach the view door for cleaning or maintenance.
Steps for cleaning carbon buildup and maintaining the burn pot.
Guide for removing and cleaning internal firebox components.
Procedure for cleaning the combustion fan blades and flue tube.
Detailed steps for cleaning the internal heat exchanger surfaces.
Identification and function of various safety devices within the stove.
Addresses problems with pellet feeding, partial burn, smoke smell, and fire going out.
Covers visible smoke from vent and low heat output problems.
