Need help?Do you have a question about the Harman HERMES 2.1 and is the answer not in the manual?
General| Category | Computer Hardware |
|---|---|
| Model | HERMES 2.1 |
| Manufacturer | Harman |
| Type | 2.1 Speaker System |
| Frequency Response | 40Hz - 20kHz |
| Input Impedance | 10k ohms |
| Driver Size (Subwoofer) | 5.25 inches |
| Color | Black |
| Connector Type | 3.5mm audio jack |
| Signal-to-Noise Ratio | >75dB |
| Driver Size (Satellites) | 2.5 inch |
Legal information, confidentiality, liability, modification rights, and copyright.
Covers call types, connectivity options (LTE, WiFi, Bluetooth), and telematics functions.
Illustrates the HERMES unit's architecture, main functions, and interfaces with other vehicle systems.
Details the key hardware components, including SOC, controller, audio, and network modules.
Describes the audio path, microphone and speaker connections, and audio codec requirements.
Explains the main controller and the diagnostic ports available for system analysis.
Outlines the different operational modes of the HERMES unit, including sleep, normal, and DNO.
Lists the clock frequencies for the main controller and other key hardware components.
Details the WLAN capabilities, supported modules, variants, and technical parameters.
Shows the physical connectors on the HERMES unit and provides a detailed pinout description.
Visual representation of the HERMES unit with model and compliance markings.
States compliance with EU Directive 2014/53/EU for HERMES 2.1.
To Next Page
