Harman JBL BAR 1300X - Bluetooth Device Pairing

1212
5.1.3 OPTICAL
HDMI OUT
*
OPTICAL
HDMI IN
OPTICAL
TVTVTVTV
NOTES:
– With the 6 up-ring speakers and the detachable surround
speaker design, the Dolby surround upmixer of the soundbar can
expand the legacy channel-based audio of Dolby Digital format,
including 5.1 and 7.1 content, and provide an immersive 3D Atmos
experience.
1. Connect the soundbar with your TV by using an optical
cable.
2. Use an HDMI cable (V2.0 or later) to connect your TV with
your digital device, such as a streaming device, set-top box,
DVD/Blu-ray player or game console.
3. To play audio through the optical cable, select TV on the
remote control.
NOTES:
– * The HDMI cable (for digital device connection) and the optical cable
are sold separately.
– Full compatibility with all HDMI-CEC devices is not guaranteed.
– When both HDMI ARC and optical cables are connected to the
soundbar for audio input from TV connection, the HDMI ARC
connection is prioritized.
5.2 Bluetooth connection
Through Bluetooth, connect the soundbar with your Bluetooth
device, such as a smartphone, tablet and laptop.
Settings Bluetooth
Bluetooth
DEVICES
JBL Bar 1300_xxxx
Now Discoverable
Connected
< 10 m / 33 ft
BT PAIRING
5.2.1 Connect a Bluetooth device
1. To select Bluetooth source, press on the soundbar or on
the remote control.
J “BT PAIRING”: Ready for BT pairing
2. On your Bluetooth device, enable Bluetooth and search for
“JBL Bar 1300_xxxx” within three minutes.
J Successful connection: The device name is displayed
if your device is named in English. A conrmation tone
is heard.
5.2.2 To reconnect the last paired device
Your Bluetooth device is retained as a paired device when the
soundbar goes to standby mode. Next time you switch to the
Bluetooth source, the soundbar reconnects the last paired
device automatically.