1616
3. Rotate for the best listening experience.
NOTES:
– During sound calibration, all buttons on the remote control are
disabled except for and CALIBR.
6.3.2 Dolby Atmos
®
With Dolby Atmos, overhead audio distribution is provided for
powerful 3D sound immersion.
MID HIGHLOW
LOW
MID
HIGHLOW
MID
HIGH
1. To play the surround sound of Dolby Atmos, connect and
play your Blu-ray player or streaming device as described
under “5.1 Connection with your TV and digital devices”.
2. To select suitable strength for Dolby Atmos, press on
remote control to toggle between middle (default), high, or
low.
NOTES:
– The Atmos sound effects are available in Dolby audio content only.
6.3.3 Rear adjustment
With both of the detachable rear speakers undocked, you can
select the surround sound level.
LOW
MID
MUTE
HIGH
MID HIGH
MUTE
LOW
1. Check that the soundbar and the detachable rear speakers
are connected wirelessly (See “6.1 Connect the detachable
rear speakers and subwoofer”).
2. On the remote control, press to toggle between surround
sound levels.
J “MID” / “HIGH” / “MUTE” / “LOW” is displayed
(Default: “MID”).
J “UNDOCK REAR SPKR” is displayed if the detachable
rear speakers have been docked onto the soundbar.
UNDOCK REAR SPKR
6.3.4 Bass adjustment
You can make bass adjustment as needed.
LVL 3
LVL 4
LVL 5LVL 1
LVL 2
LVL 3
LVL 4
LVL 5LVL 1
LVL 2
• On the remote control, press to toggle between bass
levels.
J “LVL1” to “LVL5” is displayed (Default: “LVL3”).
To Next Page
Loading...
