Do you have a question about the Harman JBL Duet and is the answer not in the manual?
Brand | JBL |
---|---|
Model | Duet |
Waterproof | No |
Aux Input | Yes |
Frequency Response | 20kHz |
Safety and usage instructions should be read and followed carefully before operating the audio system.
All warnings on the system and in instructions must be heeded.
Operating and usage instructions should be observed.
Do not remove the cover; internal parts are not user-serviceable. Refer to qualified personnel.
Avoid exposing speakers to liquids or solvents.
Never remove speaker grilles for repair; refer to service for internal repairs.
Do not expose speakers to extreme temperatures, humidity, sunlight, or excessive vibration.
Place speakers on a stable, flat surface. Avoid dropping or placing heavy objects.
Clean speakers with a soft, dry cloth. Use a damp cloth without solvents if necessary.
Protect speakers from feedback, prolonged electronic music signals, or distorted signals.
Avoid placing speakers near fluorescent or neon lighting.
Keep magnetic recording media at least 10 cm away due to magnetic shielding.
To reduce fire/shock risk, do not expose speakers to rain or moisture.
Identifies the manufacturer of the product.
Specifies the product model number.
Details the type of speaker drivers used.
Indicates the power output or requirements.
Provides the physical measurements of the product.
Specifies the electrical input impedance.
Indicates the audio signal-to-noise ratio.
Defines the range of audible frequencies the speakers can reproduce.
Specifies the input signal level required for rated output.
States the maximum power the device consumes.
Lists the certifications and approvals obtained.
Declares compliance with FCC rules for digital devices and potential interference.
Provides steps for users to correct radio or television interference.
Warns that unauthorized modifications can void user authority to operate the equipment.
Illustrates connecting speaker cables to audio output ports on a computer.
Shows connecting the power cord to one of the speakers.
Illustrates plugging the power adapter into an electrical outlet.
Depicts the final placement and connection of both speakers.