- 12 -
To pair manually
>5S
>5S
1. On the headset, slide the power switch upwards and hold for more than 5 seconds
until the status LED flashes white.
2. On the 2.4G USB wireless dongle, hold CONNECT for more than 5 seconds until
the LED flashes white quickly.
Both LEDs on the headset and dongle turn solid white after successful
connection.
TIPS:
• The headset turns off automatically after 10 minutes of inactivity.
• The
LED enters connecting mode (flashing slowly) after disconnection from
the headset.
• Compatibility with all USB-A ports is not guaranteed.
To Next Page
Loading...
