Harman JBL WIND3 User Manual

Bluetooth
pairing
FM RADIO
Insert TF card to play music
Plug in Aux cable to play music
TF / AUX-IN
WHAT’S
IN THE
BOX
ON
Settings Bluetooth
Bluetooth
DEVICES
Now Discoverable
Connected
JBL Wind 3
WIND3
chargING
WATERPROOF
DUSTPROOF
IP67
1m
30 mins
IP67
1 2
BUTTONS
Bicycle
Mount
Tune Down (FM) /
Previous Track
(BT/TF)
Power On / Off
Source Switch
Tune Up (FM) /
Next Track
(BT/TF)
Source Switch to FM
mode
Volume Down
1
TUNE DOWN / TUNE UP:
Press 1x to tune down/up by step manually
Press 2x to tune to the previous/next
preset station
AUTO SCAN:
Long press to search for and tune to the
previous/next available station automatically
2
FM
1
2
Install the included
mounting bracket onto
bicycle handlebars.
Dock/undock the
speaker into the
mounting bracket
effortlessly
X1
bracket
X1
non-slip pads(big)
X1
QSG
X1
non-slip pads(small)
X1
plastic screw
X1
USB cable
WIND3
Volume Up
Play/Pause*
*long press to switch EQ between 'Sport' and 'Bass' mode
Answer/ Ignore incoming call: Short press/ Long press
End on-going call: Short press
TECH SPEC
Transducer: 43 mm x 47 mm / 1.5"
Output power: 5 W RMS
Frequency response: 110 Hz - 20 kHz
Signal-to-noise ratio: > 85 dB
Battery capacity: 1050 mAh
Battery charge time: 2.5 hours (5 V 1 A)
Music play time: up to 5 hours (dependent on volume level and audio content)
Bluetooth® version: 5.0
Bluetooth® profile: A2DP 1.3, AVRCP 1.6, HFP 1.7
Bluetooth® transmitter frequency range: 2400 MHz - 2483.5 MHz
Bluetooth® transmitter power: <5 dBm (EIRP)
Bluetooth® transmitter modulation: GFSK, π/4 QPSK, 8DPSK
FM Tuning range: 87.5 MHz - 108 MHz (varies by countries)
Dimensions (W x H x D): 90 mm x 73.2 mm x 35.8 mm
Weight: 0.230 kg
Maximum operation temperature: 45 °C

Harman JBL WIND3 Specifications

General

Brand	Harman JBL
Model	WIND3
Category	Bicycle Accessories
Type	Bluetooth Speaker
Water Resistance	IP67
Battery Life	Up to 5 hours
Bluetooth Version	5.0
Speaker Output	5W RMS
Mounting Type	Handlebar Mount
Frequency response	110Hz - 20kHz
Signal-to-noise ratio	> 85dB
Bluetooth transmitter modulation	GFSK, π/4 DQPSK, 8DPSK
Bluetooth transmitter power	0-4dBm
Battery type	Li-ion polymer (3.7V/1050mAh)
Bluetooth profile	A2DP 1.3, AVRCP 1.6
Bluetooth transmitter frequency range	2.402GHz - 2.480GHz

Summary

Bicycle Mount Setup

Install Mounting Bracket

Install the included mounting bracket onto bicycle handlebars.

Dock and Undock Speaker

Dock and undock the speaker into the mounting bracket effortlessly.

Speaker Buttons and Functions

Volume and Track Control

Control volume up/down and navigate previous/next tracks in BT/TF modes.

Playback and EQ Modes

Play/pause music and switch EQ between 'Sport' and 'Bass' modes.

Power and Source Switching

Turn the device on/off and switch audio source modes.

Call Management

Answer, ignore, or end incoming/ongoing calls using short/long presses.

Bluetooth Pairing

Connect to Bluetooth Device

Pair your device by selecting 'JBL Wind 3' from the Bluetooth settings.

FM Radio Operation

Tune FM Stations

Manually tune down/up by step or press twice for preset stations.

Automatic Station Scan

Long press to automatically search and tune to the next available station.

TF Card and AUX-IN Playback

Play Music via TF Card

Insert a TF card into the designated slot to play music.

Play Music via AUX Cable

Connect an AUX cable to play music from external devices.

Charging and Battery Status

Charging Status Indicators

Monitor charging status, low battery, and USB connection.

Waterproof and Dustproof Rating

IP67 Rating Explained

Device is protected against dust and water immersion up to 1 meter for 30 minutes.