1. Information on power consumption. This equipment complies with
European Commission Regulation (EC) No 1275/2008 and (EU) No
801/2013.
O
(all wireless connections are deactivated)
0.5 Watt
Networked standby 2.0 Watt
2. The period of time after which the power management function
switches the equipment automatically into:
O Short press power key
Networked
standby
If the device is connected
with Bluetooth or Wi-Fi
the device shall enter
2.0 Watt networked
Standby automatically
in 20 minutes.
3. If this equipment has wireless network connections:
How to activate wireless network connections:
• Set up the product according to instructions;
• Switch into wireless mode (Bluetooth or Wi-Fi);
• Connect with energy using product(s).
How to deactivate wireless network connections;
• Short press power key to turn off the device.
This device complies with Part 15 of the FCC rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. CAN ICES-3 (B) /
NMB-3 (B).
IC Caution:
User should also be advised that:
(i) the device for operation in the band 5150 - 5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands
5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p.
limit: and
(iii) the maximum antenna gain permitted for devices in the band
5725 - 5825 MHz shall comply with the e.i.r.p. limits specified for point-
to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated
as primary users (i.e. priority users) of the bands 5250 - 5350 MHz and
5650 - 5850 MHz and that these radars could cause interference and/
or damage to LE-LAN devices.
To Next Page
Loading...
