Harman Martin ERA 600 Performance Safety And Installation Manual

Introduction 9
Tilt lock
Check that the tilt lock is released before applying power to the
fixture.
See Figure 1. Release the tilt lock by sliding the tilt lock button
(arrowed) to the Unlocked position.
You can reapply the tilt lock by first checking that the power is off
and then sliding the tilt lock button back to the Locked position.
Release the tilt lock before putting the fixture into its flightcase for
transport or storage.
Packing
Important! Allow the fixture to cool for 30 minutes and release the tilt
lock before packing it in its flightcase.
A rugged two-unit flightcase is available from Martin for the ERA
600 Performance.
The flightcase is designed to support the head without the tilt lock
(see Figure 1) in the Unlocked position. Release the tilt lock
before putting a fixture into a flightcase for transport. Leaving the
tilt lock applied may cause damage that is not covered by the
product warranty.
Figure 1: Tilt lock

Harman Martin ERA 600 Performance Specifications

General

Brand	Harman
Model	Martin ERA 600 Performance
Category	DJ Equipment
Language	English