The Harmonic ProView PVR-8140 Decoder is a professional device designed for decoding and processing video and audio signals, primarily for analog ad insertion and distribution. It supports various input and output formats, offering flexibility in different broadcast environments.

Function Description:

The PVR-8140 serves as a decoder that takes ASI (Asynchronous Serial Interface) inputs, typically from an XOS IRD (Integrated Receiver/Decoder), and outputs composite video and analog audio. It can operate in two primary modes:

Multiplex Mode: In this mode, the device generates a new stream, allowing users to select specific programs to pass through and modify their bitrate.
Transparent Mode: The entire output stream is passed through unchanged.

A key feature of the PVR-8140 is its support for DTMF (Dual-Tone Multi-Frequency) cue tones, which are essential for analog ad insertion systems. This allows for precise triggering of advertisements based on SCTE 35 standards. The device can be configured to recognize specific DTMF tone sequences for both "OON" (On-Net) and "RTN" (Return) triggers, enabling seamless integration with ad insertion workflows.

The decoder also supports input redundancy, allowing for a primary and backup input port (ASI-1 and ASI-2) to ensure continuous operation in case of a signal loss. It includes features for de-jittering, alarm thresholds, and program forwarding.

Important Technical Specifications:

Input Ports: Primarily ASI (Asynchronous Serial Interface). It can receive signals from DVB-S/S2/S2X ports (1, 2, 3, 4) and Internet DPR sockets (1, 2).
Output Ports: Composite Video Out, Analog Audio Out (ANLG. AUD 1, ANLG. AUD 2). It also supports AES/EBU digital audio and HD-SDI.
DTMF Support: Configurable for SCTE 35 triggers, with the ability to define up to four DTMF tones (0-9, *) for OON and (0-9, #) for RTN.
Rack Mounting: Standard EIA 19" rack mountable.
Power: AC power supply (100-240VAC 1A 50/60 Hz).
Operating Temperature: Maximum ambient temperature of 50° C. Proper airflow is required for cooling.
Management Interface: Front panel menu, embedded GUI accessible via a management IP port (GbE).
Redundancy: Input redundancy scheme with configurable triggers.
Decoding Features: Program selection, video, audio, POR (Program Output Rate), VBI/WANC, OSD (On-Screen Display), TS settings, program forwarding, descrambling, PDS (Program Data Service), MPE (Multi-Protocol Encapsulation), DPI (Digital Program Insertion).

Usage Features:

Front Panel Control: The device can be fully configured via its front panel menu, providing access to input, decoding, output, port settings, active alarms, presets, and unit information.
Remote Management: A comprehensive embedded GUI is available via the management IP port (GbE), offering an alternative and often more convenient method for configuration and monitoring. This requires setting up the IP address, subnet mask, and default gateway.
Cable Connections: Utilizes Mini-BNC to BNC adapter cables for ASI connections. Supports cascading ASI inputs for systems requiring more than 8 analog channels.
Ad Insertion Integration: Designed to integrate with analog ad insertion systems by providing DTMF cue tones. The pre-roll can be adjusted for timing.
Program Selection: Users can select specific programs from the input stream to output, viewing details such as program number, name, and CAS/scrambled/FTA status.
Monitoring: Initial setup allows connecting to a monitor to verify composite video and audio output.
Redundancy Configuration: Allows setting up primary and backup input ports and defining redundancy triggers for robust operation.

Maintenance Features:

Alarms and Thresholds: The device provides alarm thresholds for monitoring various parameters, helping to identify and troubleshoot issues proactively.
DMS (Device Management System) Info: The front panel menu includes a "DMS Info" section, which likely provides diagnostic information, authorized programs, and blacked-out programs, aiding in system maintenance and troubleshooting.
Physical Installation: Requires proper rack mounting and ensuring adequate airflow (cold air from front to back, hot air from bottom to top) to maintain the operating temperature and prevent overheating.
Documentation: A user manual is available for detailed instructions on using the embedded GUI and other advanced features.

Harmonic ProView PVR-8140 - Page 2

Related product manuals