harmonix HMXHW1023 - CHANGE PROGRAM; PANIC FUNCTION; DRUM MAPPING

To Next Page

To Previous Page

CHANGE PROGRAM

The default Program value of 1 is adjustable from 1 to 128 using the

Program increment and decrement buttons.

Pressing both the Program increment and decrement buttons simultaneously

will reset the current Program value to the default of 0.

Program changes are transmitted on channel 1 only.

PANIC FUNCTION

To immediately stop all notes across all channels press buttons 7, 8, and 9

simultaneously.

DRUM MAPPING

Drum Mapping enables the use of the lower octave on the keyboard for drum sounds.

To enable/disable, press UP on the directional pad. All drum notes are transmitted on MIDI

channel 10.

Note Name

Drum Assignment

Note Name

Drum Assignment

#35 – Acoustic Bass Drum

F#3

#50 – High Tom

C#3

#36 – Bass Drum 1

#42 – Closed Hi Hat

#38 – Acoustic Snare

G#3

#46 – Open Hi Hat

D#3 #40 – Electric Snare A3 #49 – Crash Cymbal 1

#41 – Low Floor Tom

A#3

#51 – Ride Cymbal 1

#47 – Low Mid Tom

#53 – Ride Bell