Harmony DEFENDER 360 3-IN-1 User Manual

®Harmony Juvenile Products HMYD3HBB-F5 17/12 CAN
DEFENDER 360°
3-IN-1 DELUXE CAR SEAT
INSTRUCTION MANUAL
STOP
This child restraint is designed for use by children
who meet the following requirements:
WITH HARNESS:
Mass: 10 - 29.5 kg (22 - 65 pounds)
Height: 68.6 - 144.8 cm (27 - 57 inches)
WITHOUT HARNESS:
Weight: 18.1 - 50 kg (40 - 110 pounds)
Height: 86.4 - 144.8 cm (34 - 57 inches)
FAILURE TO PROPERLY USE THIS CHILD RESTRAINT
INCREASES THE RISK OF SERIOUS INJURY OR DEATH
IN A SHARP TURN, SUDDEN STOP OR CRASH.
KEEP INSTRUCTIONS FOR FUTURE USE.
IF YOU HAVE ANY PROBLEMS, PLEASE DO
NOT RETURN THIS PRODUCT TO THE PLACE
OF PURCHASE. PLEASE CONTACT HARMONY
CUSTOMER SERVICE AT  OR AT
WWW.HARMONYJUVENILE.COM

Harmony DEFENDER 360 3-IN-1 Specifications

General

Category	Car Seat
Weight Limit (Rear-Facing)	5-40 lbs
Weight Limit (Forward-Facing)	22-65 lbs
Weight Limit (Booster Mode)	40-100 lbs
Height Limit (Rear-Facing)	Up to 40 inches
Height Limit (Forward-Facing)	Up to 49 inches
Height Limit (Booster Mode)	Up to 57 inches
Safety Standards	FMVSS 213
Harness Type	5-point
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Installation Method	LATCH
Recline Positions	3 positions
Product Type	Convertible Car Seat
Type	Convertible Car Seat

Summary

Registration Information

If You Need Help

General Warnings

Safety depends on proper location, routing of UAS/seat belt, and securing child.

Usage Warnings

Injury Warnings

Vehicle Warnings

Certifications

Airbag Warnings

Mass and Height Limitations

With Built-in Harness

Child mass/height, age, shoulder position, and ear level requirements for harness use.

Without Built-in Harness

Child mass/height and seat belt positioning requirements for booster mode.

Maximum Height

Parts List

Vehicle Seating Positions

Safe Vehicle Seat Belt Systems

Unsafe Vehicle Seat Belt Systems

Assembling/Disassembling Child Restraint

Preparing Child Restraint for Use

Adjusting Harness Shoulder Straps

Adjusting Crotch Strap Position

Recline

Installing Child Restraint in Harness Mode: UAS or Vehicle Seat Belt

UAS (Universal Anchorage System)

Details on vehicle UAS anchor points, locations, and usage requirements.

Installing with UAS System

Installing with Lap-and-Shoulder or Lap-Only Belt System

Using Top Tether

Installation Safety Check

Installing Locking Clip

Using Child Restraint with Built-in Harness

Securing Child in Child Restraint

Removing Child from Child Restraint

Using Child Restraint in Booster Mode (Without Internal Harness)

Removing/Installing Harness

Steps for removing and installing the internal harness system.

Preparing Booster Seat for Use

Securing Child and Booster Seat in Vehicle

Installation - Booster with Backrest

Installation - Booster Without Backrest

Installing/Removing Shoulder Belt Guide

Using Shoulder Belt Guide

How to properly position the vehicle's shoulder belt using the guide clip.

Entanglement with Vehicle Seat Belt

Aircraft Installation

Removing/Installing Fabric Seat Cover

Care and Maintenance

Warranty