3
Remove all contents from packaging, and discard box and polybags.
The bassinet and mattress comes packed within the carry case:
TO OPEN:
1. Unzip carry case and remove portable bassinet and mattress.
2. Place the bassinet frame face-down on the floor and unfold each
leg into its vertical position.
3. Each leg should LOCK into place automatically.
4. ENSURE EACH LEG IS FIRMLY LOCKED INTO PLACE BY
PUSHING/PULLING ON IT.
5. Flip unit over to upright position and place on a flat floor.
ENSURE that bassinet is level and stable.
6. Place mattress into bassinet frame and secure all 4 hook-and-
loop fasteners as indicated. Pass each fastener through the fabric
as indicated, and secure on the underside.
TO FOLD:
1. Undo all 4 hook and loop fasteners as remove mattress. Set
aside.
2. Turn bassinet over and place face-down on the floor.
3. Pull each leg “lock” in the direction of the arrow, and gently fold
leg downwards.
TIP: If lock is difficult to lift, gently
move leg back and forth while
lifting lock.
4. Place bassinet and mattress into carry case.
A - Bassinet Frame
B - Foldable Legs (x4)
C - Leg locking
mechanism (x4)
D - Mattress
E - Carry Case
FEATURES
USING BASSINET
A
B
C
E
B
B
B
D
x4
To Next Page
Loading...
