Harmony GENESYS - Installation and Adjustment Procedures; Adjusting Crotch Strap Position; Installing with Vehicle Seat Belt (Group 1)

12
The crotch strap has two (2) positions.
1. Remove fabric crotch pad.
2. Push the buckle down through the fabric seat cover towards the plastic base of
the child restraint.
3. Lift the fabric seat cover on the base of the child restraint to expose the buckle
and slot positions.
4. Guide the crotch strap through the plastic base to the desired slot position
(4).
! ENSURE that the strap is COMPLETELY in the desired slot and the harness strap
is NOT twisted. Gently pull upwards to ensure it is firmly in place.
! ENSURE that the buckle is facing FORWARD
(5).
5. Push the buckle upwards through the fabric seat cover.
6. Replace fabric seat cover and fabric crotch pad.
! Use ONLY the vehicle’s 3-point lap-and-shoulder belt system when restraining this
child restraint to the vehicle
(6). DO NOT use this child restraint with a 2-point
vehicle belt
(7). Your child would be seriously injured in the event of a crash.
1. Place the child restraint flush against a forward-facing vehicle seat. The vehicle
seat MUST be equipped with a 3-point lap-and-shoulder belt. The child restraint
must be level, stable and not rock side-to-side.
2. Thread the vehicle shoulder belt portion of the seat belt behind the headrest ON
THE SAME SIDE as the seat belt retractor
(8).
3. Open harness system and lift insert cushion. Thread the lap portion of the
WARNING!
!
FAILURE TO REINSTALL THE HARNESS STRAPS CORRECTLY COULD
RESULT IN SERIOUS INJURY OR DEATH.
ADJUSTING CROTCH STRAP POSITION
WARNING!
!
FAILURE TO REINSTALL THE CROTCH STRAPS CORRECTLY COULD RESULT
IN SERIOUS INJURY OR DEATH.
INSTALLING WITH VEHICLE SEAT BELT
GROUP 1 (9 - 18 KG)