Harper & Bright Designs WF189430BAA - User Manual

IMPORTANT NOTE:
** PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CARPET TO AVOID
THE PARTS FROM BEING SCRATCHED.
** BEFORE YOU BEGIN, KINDY FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP.
** DO NOT TIGHTEN ALL SCREWS AND BOLTS UNTIL THE TABLE IS FULLY SET-UP.
MADE IN VIETNAM
1 OF 5
WF189430BAA - 1 PC COUNTER HIGH TABLE & 4 PCS BARSTOOL- BLACK
ASSEMBLY INSTRUCTIONS
WF189430DAA - 1 PC COUNTER HIGH TABLE & 4 PCS BARSTOOL- BROWN

Summary

Counter High Table and Barstool Assembly Instructions

Important Assembly Notes

Key precautions before assembly: protect parts, follow steps sequentially, and delay full screw tightening.

Step 1: Attach Table Legs

Connect table legs to the tabletop using bolts, spring washers, flat washers, and an Allen key.

Step 2: Table Base Assembly

Illustrates the partially assembled table base.

Step 3: Assemble Barstool Frame

Connect barstool legs and front/back stretchers using screws.

Step 4: Complete Barstool Frame

Attach side stretchers to the barstool legs using screws.

Step 5: Attach Barstool Seat

Secure the barstool seat to the assembled frame with bolts, washers, and an Allen key.

Step 6: Final Barstool View

Shows the completed individual barstool.

Step 7: Complete Set Assembly

Displays the fully assembled counter high table with four barstools.

Harper & Bright Designs WF189430BAA Specifications