Harper & Bright Designs WF192540

To Next Page

ASSEMBLY INSTRUCTIONS

ITEM # : WF192540 &WF192541

1-Follow the information on the warning label appearing on the upper bunk bed

and structure on the carton ...Do not remove warning label from bed

2-Alway use the recommended size mattress or mattress support, or both,

to help prevent the likelihood of entrapment or falls.

3-Surface of mattress must be at least 5 inches below the upper edge of guard rails.

4-Do not allow children under 6 years to use the upper bunk bed.

5-Prohibit more than one person on upper bunk.

6-Periodically check and ensure that the guardrail, ladder, and other components are

in their proper position, free from damage, and that all connectors are tight.

7-Do not allow horseplay on or under the bed and prohibit jumping on the bed.

8-Always use the ladder for entering and leaving upper bunk.

9-Do not use substitute part. Contact the manufacturer or dealer for replacement part.

10-Use of night light may provide added safety precaution for a child using the upper

bunk.

11-If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed.

12-Always use guardrail on both long sides of the upper bunk.

13-The use of water or sleep flotation mattresses is prohibited.

14-Keep these instruction for future reference.

15-Strangulation Hazard - Never attach or hang items to any part of the bunk bed that are not

designed for use with the bed, for example, but not limited to hooks, belts and jump rores.

SAFETY WARNINGS

Page 1

Need help?

Do you have a question about the Harper & Bright Designs WF192540 and is the answer not in the manual?

Summary

SAFETY WARNINGS

PRODUCT COMPONENTS

Part Lists

Lists all furniture parts required for assembly, including part names and quantities.

Hardware Lists

Details all hardware components, screws, bolts, and tools needed for assembly.

ASSEMBLY INSTRUCTIONS

STEP 1: Headboard Assembly (I)

Instructions for assembling the first headboard component using specific parts and hardware.

STEP 2: Headboard Assembly (I)

Continues the assembly of the headboard, attaching side rails and supports.

STEP 3: Completed Twin Slat Assembly (I)

Details the process of attaching the bed slats to the assembled frame.

STEP 4: Headboard Assembly (II)

Instructions for assembling the second headboard component for the other bed.

STEP 5: Headboard Assembly (II)

Assembly steps for the second headboard, connecting side rails and supports.

STEP 6: Headboard Assembly (II)

Further assembly of the second headboard structure, including guardrail supports.

STEP 7: Headboard Assembly (II)

Final assembly of the second headboard and guardrail components.

STEP 8: Completed Twin Slat Assembly (II)

Attaching the bed slats to the second assembled bed frame.

STEP 9: Ladder (II) Assembly

Instructions for assembling the ladder structure for the upper bunk.

STEP 15: Ladder (I)&(II) Assembly

Final assembly connecting both ladders to the respective bunk beds.