Title: PCM-1 to PCM-2 Upgrade Instructions Sheet 17 of 25 Rev: A Dwg: 873-4514-001
STEP 42. Select “MIB Config”. Figure 27 displays the MIB setting for most
transmitter systems. If the settings are different from what is shown here then
change them to match.
Figure 27
STEP 43. Select “Back” twice to return to the “Network” page.
STEP 44. Select “NTP Config”
STEP 45. Enter the information that was collected in step 2d by selecting the white
box to the right of each item. When completed select “Save”
Figure 28
STEP 46. Select “Back” three times to return to the “TCU HOME” page.
STEP 47. Select the LPU A “Exciter” button
To Next Page
Loading...
