Harris PRO2000 User Manual

PRO2000
TM
Tone Generator and Probe User’s Guide
0II-729003-001, Issue 2, 2/02 Printed in Germany, MK
EC Statement of Conformity
Manufacturer: Kurth Electronic
Daimierstrasse 13
72793 Pfullingen
Germany
Signature: _________________________________
Print: _________________________________
Importer: Harris Corporation
809 Calle Plano
Camarillo, CA USA 93012
Signature: _________________________________
Print: Ed Zoiss, Director of Engineering
Standards Used:
• EN 60082-2 — Electromagnetic Compatibility Generic
Standard Interference Immunity Part 2: Industrial Sector
• 50081-2 — Electromagnetic Compatibility Generic
Standard Unwanted Emission, Part 2: Industry
• EN 50081-1 — Generic Standard Unwanted Emission,
Residential Area
• EN 50082-2 — Generic Standard Interference
Immunity, Industrial Sector
Product Name: PRO2000
TM
Tone Generator and Probe
Model Number(s): __________________
Kurth Electronic herewith states that the following product (system/machine/safety component/device) conforms to the
provisions of Electromagnetic Compatibility Directive 89/336/EEC based on test results performed in a typical
configuration. The following domestic or international standards (or parts/clauses therefrom) and specifications were
applied:
Déclaration de conformité EC
Fabricant: Kurth Electronic
Daimierstrasse 13
72793 Pfullingen
Germany
Signature: _________________________________
Nom: _________________________________
Importateur: Harris Corporation
809 Calle Plano
Camarillo, CA USA 93012
Signature: _________________________________
Nom: Ed Zoiss, Director of Engineering
Normes appliquées:
• EN 60082-2 — Compatibilité électromagnétique,
norme générique, immunité au brouillage, partie 2:
secteur industriel
• 50081-2 — Compatibilité électromagnétique, norme
générique, émissions indésirables, partie 2:
industrie
• EN 50081-1 — Norme générique, émissions
indésirables, zones résidentielles
• EN 50082-2 — Norme générique, immunité au
brouillage, secteur industriel
Nom du produit: PRO2000
TM
Générateur de tonalité et sonde
Numéros de modèle(s): ___________________
Kurth Electronic déclare par la présente que, sur la base des résultats d'essais effectués pour une configuration type, le
produit suivant (système/machine/dispositif de sécurité/appareil) est conforme aux dispositions de la Directive 89/336/EEC visant la
compatibilité électromagnétique. Les spécifications et normes nationales ou internationales suivantes (ou certaines de leurs clauses/parties)
ont été appliquées:
PRO2000
TM
Generador de Tono y Sonda Guía para
PRO2000
TM
Générateur de Tonalité et Sonde Guide
de l’Utilisateur

Harris PRO2000 Specifications

General

Selectivity	70 dB
Audio Output	500 mW
Power Supply	7.5 VDC
Channels	128 Channels
Modulation Modes	FM
Sensitivity	0.25 μV (12 dB SINAD)
Weight	0.5 lbs

Summary

EC Statement of Conformity

Standards Used

Lists standards used for Electromagnetic Compatibility testing of the product.

Safety Information

User Risk Warnings

Highlights conditions and hazards posing risk to the user.

Device Damage Cautions

Highlights conditions and hazards that may damage the Tone Generator or Probe.

IEC Symbol Explanations

Explains the IEC symbols used on the device or in the manual.

Tone Generator Specifications

Housing and Test Leads

Details the heavy-duty housing and durable test leads with alligator clips.

Frequency and Protection Features

Specifies selectable frequencies and over-voltage protection.

Tracing and Power Specifications

Outlines tracing distance, cable length, and high power output.

Battery and General Specs

Provides battery life, dimensions, weight, and other specifications.

Probe Specifications

Probe Housing and Tip

Details the water-resistant housing, carbon fiber tip, and earphone jack.

Probe Battery and Dimensions

Provides probe battery life, dimensions, and weight specifications.

Operating Warnings and Procedures

Electrical Shock Hazard

Warns against using on energized wiring and advises disconnecting power.

Environmental Precautions

Recommends avoiding use in adverse or wet weather conditions.

Basic Operation and Battery Use

Explains basic connection, signal tracing, and battery replacement.

Probe Functionality

Describes the probe's sensitivity and use with an earphone jack.

Tone Generator Signals

Explains the SOL and ALT signals and LED status indicators.

Cable Tracing and Pair Identification

Cable Tracing Procedure

Guides on finding cable paths inside walls using the TONER and PROBE.

Tracing Pairs

Explains how to connect leads, interpret POL LED, and locate pairs.

Advanced Functions and Indicators

Short/Open Line Detection

Explains using CONT mode to detect shorts or open lines.

Pair Location Verification

Details methods for verifying the correct pair location.

Continuity Metering

Describes setting the unit for continuity testing.

Line Polarity and Voltage

Explains POL LED indications for line status and voltage levels.

In-House Communication Setup

Communication Setup

Describes using the TONER as a power source for analog telephones.

Warranty Information

Product Warranty Coverage

Details the 18-month warranty for defects in parts or workmanship.

Warranty Exclusions

Lists conditions not covered by the warranty, like neglect or misuse.

Non-Warranty Service

Explains out-of-warranty maintenance and repair services.

Return and Repair Procedures

Outlines steps for returning products for credit or warranty service.