To Next PageTo Next Page
Need help?Do you have a question about the Harris stereomixer digital 99-1395 and is the answer not in the manual?
Audio Performance| Frequency response | +0 dB/-0.65 dB, 20 Hz to 20 kHz |
|---|---|
| Dynamic range analog in to analog out | 101 dB, 104 dB "A" weighted |
| Dynamic range analog in to digital out | 104.5 dB |
| Dynamic range digital in to analog out | 103.5 dB, 106.5 dB "A" weighted |
| Dynamic range digital input to digital output | 115 dB |
Audio Distortion| Total harmonic distortion + noise analog input to analog output | <0.003%, @ 1 kHz, +18 dBu input and output |
|---|---|
| Total harmonic distortion + noise digital input to digital output | <0.0005%, @ 1 kHz, -6 dB FSD input and output |
| Total harmonic distortion + noise digital input to analog output | <0.002%, @ 1 kHz, -6 dB FSD input, +18 dBu output |
Input and Output Impedance| Input impedance | >40k, balanced |
|---|---|
| Output source impedance | <3 ohms, balanced |
| Output load impedance | 1k ohm, minimum |
Power Supply| Type | External, multiple output (+15, -15, +5) |
|---|---|
| Input AC voltage | 95 - 264 VAC, 50/60 Hz |
| Cooling | Convection cooled, no fans |
Dimensions| Rack-Mount dimensions | 7" x 19.0" x 3.0" (H, W, D) (4 RU) |
|---|---|
| Desktop dimensions | 4" x 16" x 17" (H, W, D) |
| Latency analog input to analog output | <1.6 ms |
Details on using Channel 1 as a talent mic and other mic input configurations.
