Safety and Installation Considerations
This page contains definitions, warnings, and practical information to ensure a safe working
environment. Please take time to ready this page before installing or using this apparatus.
- 2 -
General Safety
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Do not expose this apparatus to rain or moisture.
- Clean only with dry cloth.
- Don not block any ventilation openings.
- Install in accordance with the rack manufacturer’s instructions.
- There are no user adjustments, or user-serviceable items on this apparatus.
- Adjustments or alterations to this apparatus may affect the performance such that safety
and /or international compliance standards may no longer be met.
- This apparatus is not to be used in safety critical applications.
Caution
- This apparatus should not be used outside of the scope of API 500 series compatible racks.
- Do not operate this apparatus with any covers removed.
- To reduce the risk of electric shock, do not perform any servicing other than that contained in
these installation instructions unless you are qualified to do so. Refer all servicing to qualified
personnel.
Installation
- Ensure power is removed from the rack before fitting or removing the apparatus to or from
the rack.
- Use the panel fixing screws supplied with the rack to secure this apparatus into the rack.
Safety and Installation Considerations
This page contains definitions, warnings, and practical information to ensure a safe working
environment. Please take time to ready this page before installing or using this apparatus.
- 2 -
General Safety
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Do not expose this apparatus to rain or moisture.
- Clean only with dry cloth.
- Don not block any ventilation openings.
- Install in accordance with the rack manufacturer’s instructions.
- There are no user adjustments, or user-serviceable items on this apparatus.
- Adjustments or alterations to this apparatus may affect the performance such that safety
and /or international compliance standards may no longer be met.
- This apparatus is not to be used in safety critical applications.
Caution
- This apparatus should not be used outside of the scope of API 500 series compatible racks.
- Do not operate this apparatus with any covers removed.
- To reduce the risk of electric shock, do not perform any servicing other than that contained in
these installation instructions unless you are qualified to do so. Refer all servicing to qualified
personnel.
Installation
- Ensure power is removed from the rack before fitting or removing the apparatus to or from
the rack.
- Use the panel fixing screws supplied with the rack to secure this apparatus into the rack.
- 8 -
Nashville – Music City - USANashville – Music City - USA
Visit Harrison Audio LLC at:
www.harrisonaudio.com
Harrison Audio LLC
All rights reserved.
All other product names and trademarks are the property of their respective
owners and are hereby acknowledged.
No part of this publication may be reproduced in any form or by any means,
whether mechanical or electronic, without the written permission of
Harrison Audio LLC, 750 Jim Parker Drive STE 103, Smyrna TN. 37167 USA
As research and development is a continual process, Harrison Audio LLC reserves
the right to change the features and specifications described herein without
notice or obligation.
Harrison Audio LLC can not be held responsible for any loss or damage arising
directly or indirectly from any error or omission in this manual.
PLEASE READ ALL INSTRUCTIONS, PAY SPEICAL HEED TO SAFETY WARNINGS.
September 2023
Version v1.0
Harrison Part Number: 0700-50002
- 3 -
Limited Warranty
Please refer any warranty claim to the supplier of this equipment in the first instance. Full
warranty information for equipment supplied directly by Harrison Audio LLC can be found on our
web site.
www.harrisonaudio.com
Instructions for Disposal of WEEE by Users in the
European Union
The symbol shown here is on the product or on its packaging, which
indicates that this product must not be disposed of with other waste. Instead,
it is the user’s responsibility to dispose of their waste equipment by handing
it over to a designated collection point for recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local city
office, your household waste disposal service or where you purchased the product.
Instructions for Disposal of WEEE by Users in the
European Union
The symbol shown here is on the product or on its packaging, which
indicates that this product must not be disposed of with other waste. Instead,
it is the user’s responsibility to dispose of their waste equipment by handing
it over to a designated collection point for recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local city
office, your household waste disposal service or where you purchased the product.
Standards Compliance
This apparatus complies with international EMC and Safety Standards when installed
in a fully compliant rack.
UKCA
Electrical Equipment (Safety) Regulations 2016 (SI 2016/1101)
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091).
The Restriction of the use of certain Hazardous Substances in Electrical and
Electronic Equipment Directive (RoHS2) 2012 (SI 2013/3032)
CE
EU Low Voltage directive (LVD) 2014/35/EU,
EU Electromagnetic Compatibility directive (EMC) 2014/30/EU.
The Restriction of the use of certain Hazardous Substances in Electrical and
Electronic Equipment Directive (RoHS2) 2011/65/EU.
FCC
This device complies with Part 15 of FCC rules. Operation is subject to the following
two conditions: this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Industry Canada
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Environmental Temperature: Operating: +1 to 30°C. Storage: -20 to 50°C.
- 3 -
Limited Warranty
Please refer any warranty claim to the supplier of this equipment in the first instance. Full
warranty information for equipment supplied directly by Harrison Audio LLC can be found on our
web site.
www.harrisonaudio.com
Instructions for Disposal of WEEE by Users in the
European Union
The symbol shown here is on the product or on its packaging, which
indicates that this product must not be disposed of with other waste. Instead,
it is the user’s responsibility to dispose of their waste equipment by handing
it over to a designated collection point for recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local city
office, your household waste disposal service or where you purchased the product.
Standards Compliance
This apparatus complies with international EMC and Safety Standards when installed
in a fully compliant rack.
UKCA
Electrical Equipment (Safety) Regulations 2016 (SI 2016/1101)
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091).
The Restriction of the use of certain Hazardous Substances in Electrical and
Electronic Equipment Directive (RoHS2) 2012 (SI 2013/3032)
CE
EU Low Voltage directive (LVD) 2014/35/EU,
EU Electromagnetic Compatibility directive (EMC) 2014/30/EU.
The Restriction of the use of certain Hazardous Substances in Electrical and
Electronic Equipment Directive (RoHS2) 2011/65/EU.
FCC
This device complies with Part 15 of FCC rules. Operation is subject to the following
two conditions: this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Industry Canada
This Class B digital apparatus complies with Canada ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Environmental Temperature: Operating: +1 to 30°C. Storage: -20 to 50°C.
CComompp ((CCoommprpreessssoorr))
500500 Se Serriiees s MMoodudullee
UsUseerr G Guiuidede
NNNasasashvhvhviiilllllleee ––– MMMusususiiiccc C C Ciiitttyyy --- USUSUSAAA
-- 1 1 --
To Next Page
Need help?
General