i-vent
1
i-vent
3
i-vent
5
i-vent
2
i-vent
4
i-Vent
Getting Started
Tap to power On or Off the i-vent controller.
Keep tapping until Auto is displayed.
Standard setup is finished.
For i-vent systems with outside air intake option installed only.
Tap to enable Outside Air mode.
When is displayed, Outside Air mode is on.
To maintain the i-vent system 10 year warranty
the filter must be replaced every 12 months.
www.harrisonsenergy.co.nz
To maintain the i-vent system 7 year product
and install warranty the lter must be
replaced every 12 months.