To Next PageTo Next Page
Need help?Do you have a question about the Harry 424 and is the answer not in the manual?
Lists and identifies all components of the lawnmower as shown in Fig.01.
Outlines critical safety guidelines for operating the lawnmower and protecting users.
Instructions for assembling key parts like the deflector plate, grasscatcher, and handlebar.
Essential pre-operation checks and detailed steps for starting the mower's engine.
Instructions on how to safely stop the mower's engine and blade.
Guidance on adjusting speed, mowing technique, and setting the cutting height.
Procedures for emptying the grasscatcher, lubrication, and cable regulation.
Procedures for checking, removing, sharpening, and balancing the mower blade.
Steps to prepare the mower for long-term storage, including cleaning and protection.
Instructions on how to set up and use the mulching feature for grass cutting.
Description of the Touch-N-Mow system, its product overview, and general operation.
Detailed steps for loading the system and starting the mower using Touch-N-Mow.
Common problems and checks for when the mower motor fails to start.
Critical safety advice for the Touch-N-Mow system and its unloading procedure.
Information on product guarantee and tips for technical assistance.
General| Cutting Width | 42 cm |
|---|---|
| Cutting Height | 25-75 mm |
| Grass Collector Capacity | 50 L |
| Displacement | 125 cm³ |
| Cutting Height Adjustment | Central |
