HART HFSD01 User Manual

3 – English
GENERAL POWER TOOL SAFETY WARNINGS
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool
for your application. Thecorrectpowertoolwilldothe
jobbetterandsaferattherateforwhichitwasdesigned.
Do not use the power tool if the switch does not turn
it on and off.Anypowertoolthatcannotbecontrolled
withtheswitchisdangerousandmustberepaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Suchpreventive
safetymeasuresreducetheriskofstartingthepowertool
accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidentsarecausedbypoorlymaintainedpowertools.
Keep cutting tools sharp and clean. Properlymaintained
cuttingtoolswithsharpcuttingedgesarelesslikelyto
bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Useofthepowertoolforoperationsdifferent
fromthoseintendedcouldresultinahazardoussituation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slipperyhandlesandgrasping
surfaces do not allow for safe handling and control of the
toolinunexpectedsituations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
ofbatterypackmaycreateariskoffirewhenusedwith
anotherbatterypack.
Use power tools only with specifically designated
battery packs. Useofanyotherbatterypacksmaycreate
ariskofinjuryandfire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquidejectedfromthe
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictablebehaviorresultinginfire,explosion,orrisk
ofinjury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposuretofireortemperature
above265°Fmaycauseexplosion.
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Chargingimproperlyorat
temperaturesoutsidethespecifiedrangemaydamage
the battery and increase the risk of fire.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
willensurethatthesafetyofthepowertoolismaintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturerorauthorizedserviceproviders.

HART HFSD01 Specifications

General

Brand	HART
Model	HFSD01
Category	Power Screwdriver
Language	English