9 – English
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the product
better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert
Indicates a potential personal injury hazard.
Read Operator’s
Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Eye, Hearing, and Head
Protection
Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing and
head protection when operating this equipment.
Wet Conditions Alert
Do not expose battery, battery compartment, or
electronic components to rain, water, or liquids. Do
not charge battery or expose product to rain or damp
locations.
Safety Tip Nose Guard
The safety tip nose guard on the guide bar helps
prevent kickback.
Operate With Two
Hands
Hold and operate the saw properly with both hands.
One Handed
Do not operate the saw using only one hand.
The following signal words and meanings are intended to explain the levels of risk associated
with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates a hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION:
Indicates a hazardous situation, that, if not avoided, may result
in minor or moderate injury.
NOTICE:
(Without Safety Alert Symbol) Indicates information considered
important, but not related to a potential injury (e.g. messages
relating to property damage).
To Next Page
Loading...
Need help?
General
