HART HPDD25B - User Manual

To Next Page

HPDD25 20V

Brushless Drill/Driver

Perceuse/tournevis à moteur sans balai

Taladro/destornillador sin escobillas

OPERATOR’S MANUAL

General Power Tool Safety Warnings 2-3

Drill/Driver Safety Warnings 3-4

Symbols 4-5

 Assembly 5

 Operation 5-7

Maintenance 9

Illustrations 10-11

 Parts/Service

 Backpage

MANUEL D’UTILISATION

 Avertissementsdesécuritégénérales 2-3

 relativesauxoutilsélectriques

 Avertissementsdesécuritérelatifs 3-4

 perceuse/tournevis

Symboles 4-5

 Assemblage 5

 Utilisation 5-7

Entretien 9

Illustrations 10-11

 Commandedepiècesetdépannage

 Pagearrière

MANUAL DEL OPERADOR

Advertenciasdeseguridadpara 2-3

 herramientaseléctrica

 Advertenciasdeseguridadde 4

taladro/destornillador

Símbolos 5

 Amado 6

 Funcionamiento 6-8

Mantenimiento 9

Illustraciones 10-11

 Pedidosdepiezasyservicio

 Pág.posterior

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT SAFETY INFORMATION. PLEASE

READ AND KEEP FOR FUTURE REFERENCE.

WARNING: To reduce the risk of

injury, the user must read and understand the

operator’s manual before using this product.

CE LIVRET D’INSTRUCTIONS CONTIENT DES

CONSIGNES DE SÉCURITÉ IMPORTANTES.

VEUILLEZ LE LIRE ET LE CONSERVER POUR

TOUTE RÉFÉRENCE FUTURE.

AVERTISSEMENT :

Pour

réduire les risques de blessures, l’utilisateur

doit lire et veiller à bien comprendre le manuel

d’utilisation avant d’employer ce produit.

ESTE FOLLETO DE INSTRUCCIONES CONTIENE

INFORMACIÓN DE SEGURIDAD IMPORTANTE.

LÉALO Y CONSÉRVELO PARA REFERENCIA

FUTURA.

ADVERTENCIA: Para reducir

el riesgo de lesiones, el usuario debe leer y

comprender el manual del operador antes de

usar este producto.

Main Page

Need help?

Do you have a question about the HART HPDD25B and is the answer not in the manual?

The HART HPDD25 20V Brushless Drill/Driver is a versatile cordless power tool designed for drilling and driving applications. It features a brushless motor, which generally offers longer tool life, increased efficiency, and more power compared to brushed motors. The tool is part of the HART 20V system, meaning its battery is interchangeable with other HART 20V tools.

Function Description:

The HART HPDD25 is primarily used for drilling holes in various materials such as wood, metal, and plastic, and for driving screws. It is equipped with a keyless chuck for quick and easy bit changes. The tool offers a two-speed gearbox (high and low) to optimize performance for different tasks: low speed for high torque applications like driving large screws, and high speed for faster drilling. A torque adjustment ring allows users to select the appropriate torque setting to prevent overdriving screws or damaging work surfaces. The variable speed trigger provides precise control over the drilling and driving speed. A forward/reverse/center lock selector enables users to switch between driving, removing, and locking the tool. For convenience, it includes an LED work light to illuminate the work area and a belt clip for easy portability.

Important Technical Specifications:

Voltage: 20V (cordless)
Motor Type: Brushless
Chuck Type: Keyless chuck (mandrin sans clé, portabrocas de apriete sin llave)
Speed Settings: Two-speed gearbox (high and low) for optimized performance.
Torque Adjustment: Torque adjustment ring (bague de réglage du couple, anillo de ajuste de fuerza de torsión) with multiple settings to prevent overdriving.
Variable Speed Trigger: Provides precise control over drilling and driving speed.
Direction Selector: Forward/reverse/center lock (sélecteur de sens de rotation, selector de sentido de rotación) for versatile use.
Additional Features: LED work light (lumière DEL, luz LED) and belt clip (clip de ceinture, gancho para el cinto).
Battery: Uses HART 20V lithium-ion batteries (sold separately or as part of a kit).

Usage Features:

The HPDD25 is designed for ease of use and versatility.

Battery Installation/Removal: To install the battery, align it with the tool's base and slide it in until it clicks. To remove, depress the battery pack release button and slide the battery out.
Chuck Operation: To open the chuck jaws, turn the chuck counter-clockwise. Insert the drill bit or driver bit, then turn the chuck clockwise to tighten the jaws securely. Ensure the bit is centered.
Speed Selection: The two-speed gearbox allows users to select between low speed (1) for high-torque applications like driving large fasteners and high speed (2) for faster drilling.
Torque Adjustment: The torque adjustment ring allows users to set the desired torque. Lower settings are for driving small screws or working with soft materials, while higher settings are for driving larger screws or drilling. The drill mode (indicated by a drill bit symbol) provides maximum torque for drilling.
Variable Speed Trigger: The trigger provides variable speed control; pressing it further increases the speed. This allows for precise control when starting a hole or driving a screw.
Direction Selector: The forward/reverse/center lock button allows users to select the rotation direction (forward for driving, reverse for removing) or lock the trigger in the center position for safety during bit changes or storage.
Drilling and Driving Techniques: When drilling, apply steady pressure and use the appropriate speed. For driving screws, use a lower speed and torque setting to prevent stripping or overdriving. Always ensure the workpiece is secured.
Safety Precautions: Always wear eye protection (ANSI Z87.1 compliant) when operating the tool. Do not wear loose clothing or jewelry. Keep hair tied back. Ensure the work area is well-lit and clear of obstructions. Avoid operating the tool in explosive atmospheres. Always disconnect the battery pack before making adjustments, changing accessories, or performing maintenance.

Maintenance Features:

Proper maintenance ensures the longevity and optimal performance of the HART HPDD25.

Cleaning: Regularly clean the tool's plastic parts with a soft, damp cloth. Avoid using solvents, harsh chemicals, or abrasive cleaners, as these can damage the plastic. Keep the ventilation openings clear of dust and debris to prevent overheating.
Battery Care: Store battery packs in a cool, dry place away from direct sunlight and extreme temperatures. Do not immerse battery packs in water. Follow proper disposal guidelines for lithium-ion batteries.
Chuck Maintenance: Periodically inspect the chuck for wear or damage. Keep the chuck jaws clean to ensure a secure grip on bits.
Brushless Motor: Brushless motors generally require less maintenance than brushed motors as they do not have carbon brushes that need periodic replacement.
General Inspection: Before each use, inspect the tool for any damaged parts, loose screws, or worn components. If any damage is found, do not use the tool and have it repaired by a qualified service technician.
Lubrication: The tool is designed to be maintenance-free in terms of internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.
Storage: Store the tool and battery in a secure, dry place out of reach of children and unauthorized users.