HART Proline Promag 400 User Manual

Products Solutions Services
Description of Device Parameters
Proline Promag 400
HART
Electromagnetic flowmeter
Menu/Variable
Proline Device
Access status tooling:
Operation
Setup
Diagnostics
Locking status:
Access status tooling:
Enter access code:
System
Sensor
Input
Output
Communication
Application
Diagnostics
P
P
P
P
Expert
GP01043D/06/EN/01.15
71302093
Valid as of version
01.05.zz (Device firmware)

HART Proline Promag 400 Specifications

General

Device Type	Electromagnetic flowmeter
Housing Material	Aluminum, stainless steel
Measuring Principle	Electromagnetic
Accuracy	±0.2% of measured value
Process Temperature	-40 to +150 °C
Process Pressure	Up to 40 bar
Output Signal	4 to 20 mA HART
Power Supply	24 V DC
Protection Class	IP68
Material	Stainless steel
Communication Protocol	HART
Display	LCD
Lining	PTFE, PFA
Electrode material	Stainless steel, Hastelloy, Platinum, Tantalum

Summary

Document Information

Document Function

Explains the purpose and scope of this document for device parameter reference.

Target Group

Identifies the intended audience for this document, typically specialists.

Using This Document

Provides guidance on how to navigate and understand the document's structure.

Overview of the Expert Operating Menu

Description of Device Parameters

System Submenu

Details parameters related to device system settings and display configuration.

Sensor Submenu

Covers parameters for sensor calibration, adjustment, and measured values.

Input Submenu

Manages parameters for status inputs and their functions.

Output Submenu

Configures current, pulse, and frequency outputs for device signals.

Communication Submenu

Handles HART and Web server communication settings for data exchange.

Application Submenu

Includes parameters for application-specific functions like totalizers.

Diagnostics Submenu

Provides access to device diagnostics, event logs, and troubleshooting information.

Country-Specific Factory Settings

SI Units

Defines system units and full scale values for SI measurement standards.

System Units

Lists default SI units for volume flow, temperature, mass, and density.

Full Scale Values

Provides factory default full scale values based on nominal diameter for SI units.

US Units

Defines system units and full scale values for US customary units.

System Units

Lists default US units for volume flow, temperature, mass, and density.

Full Scale Values

Provides factory default full scale values based on nominal diameter for US units.