Do you have a question about the Hartke 410XL and is the answer not in the manual?
Explanation of electronic load and measurement in Ohms for speaker cabinets.
Instructions for connecting the speaker cabinet to an amplifier using 1/4" jacks and un-shielded cable.
Guide for connecting additional speaker cabinets in parallel using the extension output.
| impedance | 8 Ohms |
|---|---|
| power handling | 400 Watts RMS |
| driver units | 4 - Hartke 10XL8 Special Design Aluminum 10", 8 ohm, 100 watt drive units |
|---|
| SPL | 98dB @ 1W/1M |
|---|---|
| frequency response | 30Hz - 5kHz |
| inputs | Parallel 1/4” |
|---|
| weight | 88 lbs. (31.91 kg) |
|---|---|
| height | 24" (60.96 cm) |
| width | 24" (60.96 cm) |
| depth | 15" (38.1 cm) |