75
Memory recall is activated by pressing the or button
when the monitor is switched off. For values saved in the first
user memory, press the button, for the second user memo-
ry press the button.
Average values
After selecting the particular user memory, the corresponding
symbol or and an A appear on the display. The aver-
age value of all the data stored for the particular user memory
is displayed (see Fig. 1).
Fig. 1
By pressing the button again
(or button if you are in user
memory2), the average values for all
morning measurements ’AM’ (5am
to 9am) taken on the last 7 days
appear.
By pressing the button again (or
button if you are in user memory
2) the average values for all evening
measurements ’PM’(6.00 pm to
8.00pm) taken on the last 7 days
appear.
Individual measured values
By pressing the button again
(or button, if you are in user
memory 2), all memory values can be
retrieved one after the other, start-
ing with the most recent measured
value.
758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 75758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 75 26.03.20 08:3326.03.20 08:33
To Next Page
Loading...
Need help?
General
