76
If an irregular heartbeat was detected during measurement,
that information is also stored and displayed when the
measured value is retrieved from the monitor’s memory
along with the systolic and diastolic blood pressure read-
ings, pulse rate, time, date and year.
You can cancel the memory recall at any time by pressing
the START/STOP button . Otherwise, the monitor will
switch off automatically after a few seconds.
Even if the power supply is interrupted, e.g. when changing
the batteries, the stored values will still be available.
Deleting saved readings
All data saved for each user can be separately deleted for user
memory and user memory . To do so, press the button of
the corresponding user memory ( or ). The average value
will then appear on the display.
Press and hold the user memory button for
5 seconds. ’CL 00’ appears on the display.
All data in the selected user memory are
now deleted. If you release the button
ahead of time, no data will be deleted.
7. Transferring measured values to
Veroval
®
medi.connect
Download the Veroval
®
medi.connect software from the
website
www.veroval.info
. Compatible with any computer
with Windows 7, 8 or 10 (for the duration of ocial Microsoft
support).
Start the program and connect the Veroval
®
wrist monitor to
your PC using the enclosed USB cable. Then follow the instruc-
tions in the Veroval
®
medi.connect software.
No data can be transferred during a measurement.
758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 76758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 76 26.03.20 08:3326.03.20 08:33
To Next Page
Loading...
Need help?
General
