Need help?Do you have a question about the Harvia C150VKK and is the answer not in the manual?
General| Model | C150VKK |
|---|---|
| Type | Control Unit |
| Power Supply | 230 V |
| Max Power | 15 kW |
| Temperature Range | 40 - 110 °C |
| Control Method | Digital |
| Protection class | IPX4 |
| Features | Lighting control, ventilator control |
| Pre-setting time adjustment range | 0 - 12 hours |
| Lighting control, max. power | 100 W |
| Ventilator control, max. power | 100 W |
| Frequency | 50 Hz |
Specifications for the control unit and thermostat, including dimensions, power, and sensor details.
Explains the function and operation of the main power switch for the control unit.
Introduces the weekly timer function for programming heater on/off times.
Details the display elements and control buttons of the weekly timer.
Guide on setting the current time and day of the week on the timer.
Step-by-step instructions for creating a new heating on/off time program pair.
Procedure for modifying an existing programmed heating time.
How to remove a programmed heating on/off time pair from memory.
Instructions for adjusting the clock for daylight saving time (summer time).
How to manually turn the heater on or off using the timer's button.
Description of the physical manual switch for direct heater control.
How to turn the heater on immediately using the manual switch.
How to turn the heater off before the programmed time expires using the manual switch.
Explains the information shown on the control unit's display screen.
Guide on using the temperature regulator to set the desired sauna temperature.
Explains the function of the red indicator light (6) for sauna temperature display.
Explains the function of the green indicator light (7) for displaying remaining on-time.
Explains the function of the red indicator light (8) indicating the heater is on.
General guidelines for mounting the control unit outside the sauna room.
Steps for detaching the top cover of the control unit before installation.
Instructions for securely mounting the control unit's base plate to a wall.
Detailed diagram and instructions for wiring the control unit to the heater and mains.
How to adjust DIP switches for maximum heater on-time and control mode.
How to connect and operate the control unit using remote control functions.
Information about the indicator lamp used for remote control status.
Guidelines for correctly positioning the temperature sensor box within the sauna.
To Next Page
