Need help?Do you have a question about the Harvia XENIO CX110 and is the answer not in the manual?
General| Max. output | 11 kW |
|---|---|
| Control type | Digital |
| Maximum load | 11 kW |
| Weight | 0.5 kg |
| Material | Plastic |
| Power Supply | 230 V, 50 Hz |
| Temperature range | 40°C - 110°C |
| Presetting time adjustment range | 1 - 12 hours |
| Controlling | lighting |
| Dimensions of the control panel | 150 mm x 85 mm |
| Control Range | 0 - 110 °C |
| Compatibility | Sauna heaters |
Describes the purpose and components of the Harvia Xenio control unit.
Provides detailed technical specifications for the control panel, power unit, and sensor.
Details error messages and provides remedies for common issues with the control unit.
Explains how to operate the sauna heater using the control unit.
Details the procedure for turning the sauna heater on and its initial operation.
Describes how to turn off the sauna heater and the conditions for automatic shutdown.
Guides users on how to modify the control unit's settings and parameters.
Explains how to use connected accessories with the control unit.
Details how to control the sauna room lighting via the control panel.
Explains basic settings including sauna temperature, on-time, and pre-setting time.
Covers additional settings like standby mode, maximum on-time, sensor adjustment, and power failure memory.
Provides step-by-step instructions for mounting the splashproof control panel.
Details the procedure for installing the power unit outside the sauna room.
Shows the electrical connections for the power unit and refers to heater-specific instructions.
Explains how to identify and replace blown fuses in the power unit.
Describes how the LTY17 unit can extend the control unit's load capacity.
Provides guidelines and warnings for correctly installing the temperature sensor.
Details the specific mounting locations for the WX232 sensor with different heater types.
Explains how to reset the overheat protector and the necessary precautions.
To Next Page
