Need help?Do you have a question about the Harvia Xenio and is the answer not in the manual?
General| Model | Xenio |
|---|---|
| Control Type | Digital |
| Power Control | Yes |
| Temperature Range | 40-110 °C |
| Lighting control | Yes |
| Weight | 0.5 kg |
| Material | Plastic |
| Compatibility | Harvia heaters |
User interface for controlling the sauna heater functions and settings.
Cable used for connecting various system components, such as the control unit to the power unit.
The main electrical unit responsible for powering the sauna heating system.
Optional accessory allowing for remote operation of the sauna heater.
Safety switch that detects if the sauna door is open, typically preventing operation.
Device that measures the sauna room temperature for accurate heating control.
General safety device to prevent operation under unsafe conditions or fault.
The primary device responsible for heating the sauna room.
Component related to the heating function and potential steam generation.
The primary on/off switch for the entire sauna heating system.
Network device enabling wireless connectivity for smart control features.
Smartphone or tablet with the MyHarvia app for remote control and monitoring.
Visual guide illustrating the correct mounting procedure for the main power unit.
Terminal designation for connecting the user interface control panel.
Terminal for connecting an optional remote activation switch.
Terminal for linking a safety switch, such as a door switch.
Terminal where the temperature sensor is connected.
Terminal for connecting sauna lighting, with a specified maximum wattage.
Terminal used for managing the electric heating functions of the sauna.
Connection point related to the residual current device or circuit protection.
Minimum required spatial clearances for safe installation within a sauna environment.
Specifies minimum distances from air vents to ensure accurate temperature readings.
Details on how to correctly install the temperature sensor and its associated magnet.
Visual guide for attaching the door sensor and magnet to the door and frame.
Optimal distance specification for reliable sensor-magnet detection.
Procedure for resetting the overheat protection that cuts power to the heater.
Important safety and operational guidelines for installation and upkeep of the device.
Key instructions for safe and proper use of the sauna heater during bathing.
Specifications including model, power, voltage, fuses, and dimensions.
Guidance on selecting a suitable location and mounting the main power unit.
Instructions for wiring, including fuse and wire size information.
Troubleshooting steps for blown fuses within the power unit.
Explanation of terminals used for controlling electric heating functions.
Detailed steps and notes for installing the temperature sensor.
Specific instructions for mounting the door sensor and its magnet.
Guidance on how to reset the overheat protector after it has tripped.
To Next Page
