To Next Page
P
Paul LeeAug 2, 2025
Why does the Harvia Control Unit activate the safety temperature limiter?
- TThomas YoungAug 2, 2025
The safety temperature limiter in the Harvia Control Unit may activate if the temperature above the heater exceeds 139 °C.
Why does the Harvia Control Unit activate the safety temperature limiter?
The safety temperature limiter in the Harvia Control Unit may activate if the temperature above the heater exceeds 139 °C.
What causes the Foil sensor excess temperature error in Harvia Control Unit?
The foil sensor excess temperature error in your Harvia Control Unit occurs when the maximum foil temperature of 100 °C is exceeded.
General| Brand | Harvia |
|---|---|
| Model | sentiotec Pro C2 |
| Category | Control Unit |
| Language | English |
Defines the purpose and limitations of the sauna control unit.
Provides essential safety guidelines for installation personnel.
Outlines safety precautions for end-users of the sauna control unit.
Provides instructions for mounting the main control unit.
Details the installation of the primary heater temperature sensor.
Details electrical connection points and general safety warnings for the unit.
Step-by-step guide for connecting power and heater cables.
Specifics for connecting the primary heater sensor.
Explains how to connect a safety shut-off device.
Lists mandatory tests to be performed by a fitter.
Visual representation of all electrical connections.
Configuration of the control unit via function selection switches.
Accessing and using the technician menu for advanced settings.
Step-by-step guide to activate single-sensor mode.
Procedure to power on the main control unit.
Steps to initiate the sauna heating process.
How to schedule the sauna to start later.
How to set the operational duration of the sauna.
Lists common error codes, their causes, and solutions.
