Hasselblad 2000FC/M - Page 8

Fig.
43
Fig.
45
CAMERA
BODY
Changing
the focusing
screen
(Fig.
43 and 44)
The
camera's
standard
focusing
screen
is
interchangeable
with
other
Hasselblad
focusing
screens.
Screens are changed as
follows:
First
remove
the magazine and
view-
finder.
Slide
the screen
catches
(B)
to the
side.
Cup
your
hand
over
the
focusing
screen
and turn
the
camera
upside
down.
The
focusing
screen
should
then
drop
into
your
hand.
If it fails
to drop
out,
remove
the lens
and
gently
tap on the
underside
of
the screen from
inside
the camera
body.
The mirror
must
be
in
the down
position
during
this operation.
Insert
a
new focusing
screen,
tho
red
marking facing
down. Make sure
the base
of
the screen rests
on
all
f
our support
pins.
When
a
finder
is
slid
into
place
over
the
focusing
screen, the catches
(B)
auto-
matically lock
the
screen
in
place.
Fig.
46
Fig.44