Hasselblad H1 - H3 D Specific Updates; Custom Option #32 for ISO;WB; Camera Menu Item; System Info Update

www.hasselblad.com
4/5
H3D only (with sensor unit attached)
On H-system cameras, ISO settings and White Bal-
ance settings can be changed either on the camera
or on the sensor unit.
On the camera, this part of the menu is normally
accessed by pressing the MENU button, turning the
front control wheeel to DIGITAL and then pressing
the ENTER (Drive) button.
The new Custom Option #32 now provides rapid
access to the ISO / White Balance setting screen
by re-assigning the FLASH, AF or DRIVE buttons.
One press of the chosen button will then take you
straight to the ISO and White Balance setting screen
for immediate last-second changes.
Custom option #32
ADDENDUM TO H1 / H1D / H2 / H2D / H3D / 503CWD /
CFV / CF - USER MANUALS
‘Camera’
The ‘Camera’ choice on the menu is now greyed out
as it is irrelevant in this conguration.
‘System Info’
The “System info” section of the menu has an
additional information screen that displays the Ultra
Focus calibration ID.
A matching ID can also be found in the sensor unit
menu for optimum performance.