www.hasselblad.com
5/5
Changes to the Warranty Conditions — all products
ADDENDUM TO H1 / H1D / H2 / H2D / H3D / 503CWD /
CFV / CF - USER MANUALS
“Hasselblad partners will provide the minimum of a twelve month
warranty to end-users (subject to their normal statutory rights) on
new Hasselblad equipment sold, valid from the date that the equip-
ment is purchased by the rst end-user.
For H System camera bodies, lm backs and lenses the warranty
will be limited to the warranty period provided by the partner or to
100,000 exposures, whichever is reached rst.
Warranty claims must be made through the dealer and/or company
where the product was originally purchased. The factory warranty
is NOT international, and warranty claims cannot be made through
other channels. This is also valid for equipment purchased outside
the country of residence.
Please note that physical damage to the CCD sensor (scratches,
chipping, unauthorized polishing) is not covered by factory warranty.
Cleaning of dust from the CCD sensor is considered as maintenance
and is thus not covered by factory warranty.”
Please note the important changes in the warranty conditions which came into effect from
the 1st July 2006 onwards. These changes replace the warranty conditions appearing in
the user manuals from 1st July 2006 onwards.
To Previous Page
Loading...
