Hasselblad Stellar - Camera Use and Storage Precautions; Avoid Extreme Environments; Protect from Direct Sunlight;Heat; Avoid Vibrations and Magnetic Fields

ENG
30
Notes on recording/playback
• Before you start recording, make a trial recording to make sure that the camera is working cor-
rectly.
• e camera is neither dust-proof, nor splash-proof, nor water-proof.
• Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur.
In some cases, the camera cannot be repaired.
• Do not aim the camera at the sun or other bright light. It may cause the malfunction of the
camera.
• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. It may cause a malfunction and you may not be able to record
images. Furthermore, the recording media may become unusable or image data may be damaged.
Do not use/store the camera in the following places
• In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become deformed and this may
cause a malfunction.
• Storing under direct sunlight or near a heater
e camera body may become discolored or deformed, and this may cause a malfunction.
• In a location subject to rocking vibration
• Near a location that generates strong radio waves, emits radiation or is strongly magnetic place.
Otherwise, the camera may not properly record or play back images.
• In sandy or dusty places
Be careful not to let sand or dust get into the camera. is may cause the camera to malfunction,
and in some cases this malfunction cannot be repaired.
On carrying
Do not sit down in a chair or other place with the camera in the back pocket of your trousers or
skirt, as this may cause malfunction or damage the camera.
Carl Zeiss lens
e camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with
exellent contrast. e lens for the camera has been produced under a quality assurance system
certied by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.
Notes on the screen
e screen is manufactured using extremely high-precision technology so over 99.99% of the pixels
are operational for eective use. However, some tiny black and/or bright dots (white, red, blue or
green) may appear on the screen. ese dots are a normal result of the manufacturing process, and
do not aect the recording.