To Next PageTo Next Page
Need help?Do you have a question about the Hastings EC-40 and is the answer not in the manual?
General| Brand | Hastings |
|---|---|
| Model | EC-40 |
| Category | Accessories |
| Language | English |
Shut off and lock main power before making repairs or replacements.
Use extreme caution during voltage tests on live circuits following safety procedures.
Electrical repairs must be performed by trained and qualified personnel only.
Do not attempt to operate the unit by jumping or bypassing any circuit.
Keep the evaporator reservoir clean and prevent sediment or scale accumulation.
Do not exceed the water pressures recommended in this manual.
Details of water connections including overflow, drain, and float valve.
Electrical specifications including pump motor, HP, amperage, and voltage.
Approximate bleed-off flow rates for different unit models.
Specifications for construction materials, media, temperature, and pH range.
Proper positioning, electrical supply, water supply, and structural support for the cooler.
Guide for making electrical connections and referring to wiring schematics.
Addresses causes and corrections for green water issues, including rinsing and algae.
Covers natural foaming and when to use a defoamer for the unit.
Explains scale formation and adjustments to bleed-off rate and water flow.
Addresses issues with water depositing into transition and reservoir not draining.
Checks for issues causing the reservoir to become dry, like valve problems.
Investigates water exiting the backside of the cooler and related causes.
