This document describes the Hatari AC Swift air cooler, a device designed to provide cooling and air circulation with the convenience of remote control.
Function Description
The Hatari AC Swift is an air cooler that utilizes water evaporation to cool the air. It features a touch screen control system and a remote control for convenient operation. The device is equipped with a fan to circulate the cooled air and various settings to customize the cooling experience. It includes a timer function, allowing users to set the operating duration, and a swing function for wider air distribution. The air cooler also incorporates a pre-filter and a water diffusing plate to enhance its performance and maintain air quality.
Important Technical Specifications
The Hatari AC Swift (Model: AC Swift) has the following key specifications:
- Size: 100 mm
- Voltage: 220V 50Hz
- Power: 46W
- Electric Current: 0.21A
- Insulation Class: F
- Retail Price (Baht): 3,790.-
- Water Tank Capacity: The manual does not explicitly state the water tank capacity in liters, but it does mention a "Water Tank" component.
- Remote Control: Operates with "AAA" batteries (2 pieces).
Usage Features
The AC Swift offers a range of features for user convenience and control:
Control Panel and Remote Control:
The device can be operated via a touch screen control system on the unit itself or through the included remote control. The control panel and remote both feature buttons for:
- ON/OFF: To power the device on or off.
- SPEED: To adjust the fan speed (settings: 0, 1, 2, 3, 4). Speed 0 is off, 1 is lowest, 2 is medium, 3 is high, and 4 is highest.
- TIMER: To set the operating duration (1, 2, 4, 8 hours, or continuous operation).
- SWING: To activate or deactivate the oscillation of the air vents for wider air distribution.
- COOL: To activate or deactivate the water cooling system.
- DIMMER: To adjust the brightness of the control panel display.
- FILL WATER: An indicator that lights up when the water level in the tank is too low, prompting the user to refill.
- ELCB: An indicator for the Earth Leakage Circuit Breaker, which lights up when an electrical warning is detected.
Operation Modes:
- Cooling Mode: Activates the water pump to circulate water and cool the air through evaporation.
- Fan Mode: Operates as a fan without activating the water cooling system.
Remote Control Battery Replacement:
To replace the batteries in the remote control, open the battery cover by pressing down on the catch and pulling it downwards. Insert two new "AAA" batteries, ensuring correct polarity (+ and -). Replace the battery cover.
Wheels Installation:
The device comes with wheels for easy mobility. To install them, ensure the water tank is empty and the power supply cord is unplugged. Place the air cooler on a flat surface, push the wheels into the indicated positions, and install two wheels at the back and two at the front of the machine.
Maintenance Features
Proper maintenance ensures the longevity and optimal performance of the AC Swift:
Cleaning Instructions:
- Exterior Cleaning: Use a damp cloth to wipe stains, then dry the area. Avoid using abrasive materials or harsh chemicals.
- Internal Components: Do not let the power cord, switch, motor, or other electrical components get wet.
- Chemical Avoidance: Do not use chemical products, thinner solvents, alcohol, kerosene, or petrol to clean the fan.
- Water Tank and Filters: The water tank, pre-filter, and water diffusing plate should be cleaned with water or soapy water every 1-2 months to prevent bacterial buildup.
Usage Precautions for Maintenance:
- Water Pump Damage Prevention: Before adding water, ensure the water pump is in the locked position (folded up) and not obstructing the water tank. This prevents the pump from falling into the water tank.
- Gel Pack Insertion: Insert the gel pack (if frozen) into the right side of the water tank to prevent water pump damage.
- Water Level Check: Constantly check the water level in the tank. Ensure it is not below the MIN level and not above the MAX level.
- Water Tank Lock: The switch locking the water tank must be in the "Closed" position during operation.
- Filter Assembly: The water diffusing plate and pre-filter must be assembled in position before turning on the machine.
General Recommendations:
- Do not place the fan in areas of extreme temperatures, near stoves, or areas with high humidity or hydrocarbon vapors.
- Do not spray any types of spray into the fan; for example, hairspray or cleaning spray.
- Do not insert fingers, pencils, or other objects into the grille while the blades are spinning to avoid injury or physical damage.
- If an electrical component such as the supply cord, motor, or switch is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons. Do not attempt to fix the fan at home.
- The fan must always be placed vertically; it should never be lying horizontally or placed upside down. If the fan falls down, unplug it immediately and lift the fan up to a vertical standing position. Use a cloth to wipe the fan and leave it to dry in order to prevent electrocution.
Safety Warnings:
- Unplug the power supply cord before filling water, cleaning, or changing components, and when not in use for a long period of time.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance.
- Children should be supervised to ensure they do not play with the appliance.
To Next Page
Need help?
General
