- Remove all packing material carefully.
- Identify and inspect all parts of model. (See Pages 2-4)
- Install Humisonic
TM
unit into cabinet. (See Page 11)
- Fill humidity tray with water (at least 1 channel). Picture 1
- Adjust Flexy35 separators to the size of the eggs you are setting.
Picture 2
- Plug in your TurnX
TM
/ Humisonic
TM
adapters to the control panel,
then plug your machine into the power supply. Picture 3
- Press power button and set the temperature and humidity for your
eggs. Picture 4 (See Pages 8-9)
CAUTION! Do not use equipment with high electric consumption
in the same electrical line as your egg incubator.
CAUTION! Always use a grounded power line for your incubator.
CAUTION! Run the incubator for 3-4 hours before first use to test
the parts and functionality.
To Next Page
Loading...
Need help?
General
