EasyManua.ls Logo

Hatchlift RV Bedlift Kit User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Attach rod end of
spring to lower bracket
Temporarily attach
angle bracket to the
center of the wood
block with two 5/8”
screws provided
Pre-drill several holes - temporarily install
Lower Bracket with 5/8
screws at top rail
of bed
Lower Mounting Bracket
Position lower bracket on top rail
Additional wood blocking may be
required
Bedlift Instructions
Variable speed drill
Measuring Tape & Pencil
#2 Phillips screwdriver
Required for Installation:
1
24
26
back
30
back
22”
24”
36”
22”
24”
3”
onnect the spring to the
upper bracket assembly on
both sides of the bed
*Pre-drill
holes
Install the wood blocks at the
locations with 1¼” gold
screws provided. Do not glue blocks
Question and Answer IconNeed help?

Do you have a question about the Hatchlift RV Bedlift Kit and is the answer not in the manual?

Hatchlift RV Bedlift Kit Specifications

General IconGeneral
CategoryLifting Systems
TypeRV Bedlift Kit
Power Source12V DC
Warranty1-year limited warranty
Actuator TypeLinear actuator
InstallationDIY installation with instructions

Summary

Before Installing RV Bedlift Kit

RV Bedlift Setup Dimensions

Full Platform Beds Setup

Specifies setup dimensions for full platform RV beds.

Partial Platform Beds Setup

Specifies setup dimensions for partial platform RV beds.

Small Compartment Beds Setup

Specifies setup dimensions for small compartment RV beds.

X-Small Compartment Beds Setup

Specifies setup dimensions for X-small compartment RV beds.

RV Bedlift Installation Steps

Lower Mounting Bracket Installation

Positioning the lower bracket on the top rail and adding wood blocking.

Pre-drilling and Spring Connection

Pre-drilling holes and connecting the spring to the upper bracket assembly.

Installing Wood Blocks

Installing wood blocks at specified locations with gold screws.

Final Assembly and Operation

Install Mattress and Bedding

Install mattress and all bedding before operating the Bedlift.

Test and Finalize Installation

Test operation, apply glue, and secure brackets with through-bolts.

RV Bedlift Troubleshooting

Bed Not Closing or Difficult Operation

Addresses issues with the bed not closing or being too difficult to operate.

RV Bedlift Installation Adjustment

General Adjustment for Lowering Bed

Guides adjustment for different bed types if too difficult to operate.

Specific Bed Type Adjustments

Details adjustments for Full Platform, Partial Compartment, and Small Compartment beds.

Safety Instructions