Hatco Flav-R-Savor FSHC-7 Series User Manual (English)

Questions and Answers:

K
Kevin BrownAug 10, 2025
What to do if my Hatco Flav-R-Savor FSHC-7 Commercial Food Equipment is plugged in but not working?
- D
  Danielle Roberts MDAug 10, 2025
  If your Hatco Commercial Food Equipment is plugged in but not working, here are a few things to check: * Ensure the unit is turned on by moving the POWER ON/OFF (I/O) switch to the ON (I) position. * Verify the electrical receptacle is working and that the power supply matches the unit's specifications. If the receptacle isn't working, check the circuit breaker and reset it, or try plugging the unit into a different, known working receptacle. * Check the circuit breaker and reset it if it has tripped. If these steps don't resolve the issue, it's possible the power cord is damaged or the POWER ON/OFF switch is defective, and you should contact an authorized service agent or Hatco for assistance.
L
Lynn SmithAug 14, 2025
Why is my Hatco Flav-R-Savor FSHC-7 Commercial Food Equipment heating but not producing humidity, even though it's full of water and the low water light is off?
- A
  Andrew FletcherAug 14, 2025
  If your Hatco Commercial Food Equipment is heating but not producing humidity, even though it is full of water and the low water light is off, it could be due to a defective water heating element or a humidity thermostat control set too low or defective. Try adjusting the humidity control to a higher setting. If that doesn't work, contact an authorized service agent or Hatco for assistance, as the water heating element or the humidity thermostat control may be defective.
J
Joshua RhodesAug 19, 2025
Why is my Hatco Flav-R-Savor FSHC-7 Commercial Food Equipment not producing humidity, even though the unit is full of water and the low water light is on?
- J
  jrobertsAug 19, 2025
  If your Hatco Commercial Food Equipment is heating but not producing humidity, and the low water light is ON even though the unit is full of water, the water level sensor may be defective. Contact authorized Service agent or Hatco for assistance.
H
hdeleonAug 25, 2025
Why is my Hatco Flav-R-Savor FSHC-7 Commercial Food Equipment producing erratic temperatures?
- J
  jasminewatsonAug 25, 2025
  Erratic temperatures inside your Hatco Commercial Food Equipment cabinet can be caused by a defective air thermostat control or an air down tube that is not connected or has been removed. Reconnect or install the air down tube. If the problem persists, contact an authorized Service agent or Hatco for assistance, as the air thermostat control may be defective.
P
paigedavisAug 30, 2025
How to troubleshoot a Hatco Flav-R-Savor FSHC-7 Commercial Food Equipment that is not circulating air?
- R
  Robert RiosAug 30, 2025
  If your Hatco Commercial Food Equipment operates but isn't circulating air inside the cabinet, it could be due to a defective blower motor or incorrect voltage supplied to the blower motor. Contact authorized Service agent or Hatco for assistance.
J
Joshua WilliamsSep 3, 2025
What to do if my Hatco Commercial Food Equipment is not producing hot air?
- G
  Glen HarrisonSep 4, 2025
  If your Hatco Commercial Food Equipment is not producing any hot air inside the cabinet, it could be due to incorrect voltage supplied to the heating element, a blower motor that is not working, or defective air heating element(s). Contact authorized Service agent or Hatco for assistance.