Hathaway MONTECITO - Step-by-Step Assembly Guide; Step 1: Leg Assembly; Step 2: Attaching Legs and Accessories

5
THANK YOU!ASSEMBLY INSTRUCTIONS
STEP 2
STEP 1
1. Use Bolts (#17) and Washers (#13) to attach
Iron Plate Connectors (#16) to Legs (#2).
2. Use Bolts (#12) and Washers (#13) to attach
Lower Leg Cross Brace (#11) to Legs (#2),
then install Leg Levelers (#4) on leg bottom.
3. Carefully turn Leg Assembly over.
#2
#11
#12
#13
#13
#17
#16
#4
#14
#2
#18
#6
#9
#8
#10
1
2
3
3
2
1
#1
#16
1. Use Screws (#18) through Iron Plate
Connector(#16) to attach Upper Leg
Cross Brace (#14) to Legs (#2).
2. Use Bolts (#5) and Washers (#6) to
attach Legs (#2) to Table Body (#1).
3. Use Screws (#10) to attach Slide
Scores (#8), then insert Wood Caps (#9)
to hide screws.
#5
#2