2L41C, 2M41, 2M41Z Operation and use
HATZ
39Operator’s Manual
NOTICE
Only operate the decompression lever while the engine is at a
standstill and observe the sense of rotation
▪ Only turn the decompression lever in the direction of the ar-
row.
▪ Exception: The lever can be turned directly back from posi-
tion "1" to "0".
▪ Position "1" is the continuous decompression setting.
Procedure
Step Activity
1 Insert the crankhandle into the guide sleeve (4).
2 Assume the correct position.
3 Grasp the handle bar with both hands.
4 Crank the engine until the crank resistance becomes markedly
less.
Starting the engine
Safety note
CAUTION
Danger of injury from recoiling of the engine.
▪ Use a crankhandle with a recoil damper.
▪ Hold the handle bar so that it cannot twist and quickly turn
the crank so that continuous traction between the engine
and crank is ensured.
▪ If recoil occurs due to cautious turning where the engine
starts in the opposite sense of rotation under certain circum-
stances (smoke from the air filter), release the crankhandle
immediately and stop the engine.
▪ To repeat the starting process, wait until the engine has
stopped; only then recommence start preparations.
CAUTION
Danger of injury if the crankhandle recoils or turns with the
engine.
▪ The use of crankhandles without recoil damping is not per-
missible within the European Union.
To Next Page
Loading...
