Hauck BCS-3000M User Manual


BCS-3000M
BURNER CONTROL SYSTEM
Table of Contents
SECTION DESCRIPTION PAGE
A. General Information 2
B. Receiving and Inspection 3
C. Drawings and Supplemental Literature 3
D. Installation 3
E. Adjustments 5
F. Final Checkout 5
G. Operation 5
H. Troubleshooting 7
Appendix A Fuel Motor Slidewire Calibration 10
Appendix B UDC3200 Temperature Controller 11
Appendix C High Temperature Limit 15
Appendix D Exhaust Flow Limit Installation 16
Appendix E Stack Thermocouple Installation 17
Appendix F Material Thermocouple Installation 18
Appendix G Recommended Spare Parts 19
Attachments: Appropriate Drawings and Schematics
WARNING
These instructions are intended for use only by experienced, qualified
combustion start-up personnel.
Adjustment of this equipment and its components, by unqualified personnel, can
result in fire, explosion, severe personal injury, or even death.
BCS-3000M-9
INSTRUCTIONS
These instructions are intended to serve as
guidelines covering the installation, operation, and maintenance of Hauck equipment. While
every attempt has been made to ensure completeness, unforeseen or unspecified applications, details, and variations may preclude
covering every possible contingency.
WARNING: TO PREVENT THE POSSIBILITY OF SERIOUS BODILY INJURY, DO NOT USE OR
OPERATE ANY EQUIPMENT OR COMPONENT WITH ANY PARTS REMOVED OR ANY PARTS NOT APPROVED BY THE
MANUFACTURER. Should further information be required or desired or should particular pr
oblems arise which are not covered
sufficiently for the purchaser’s purpose, contact Hauck Mfg. Co.
HAUCK MANUFACTURING CO., P.O. Box 90 Lebanon, PA 17042-0090 717-272-3051
8/07 www.hauckburner.com Fax: 717-273-9882

Hauck BCS-3000M Specifications

General

Brand	Hauck
Model	BCS-3000M
Category	Burner
Language	English