9
How to assemble / Convert the cot to a child’s bed:
To convert the cot into a child’s bed, loosen the screws on the side panels (D1
and D2) and the slatted frame (C) and remove the head/foot (B). Next, join the
top parts of the head/foot to the slatted frame (C), tighten the screws and you
child’s bed is ready to use. Seal off the drill holes with the caps (H).
Care instructions
The cot requires no maintenance. However, check the bed for worn-out parts
from time to time and replace them immediately.
To clean the cot, please use a damp cloth and mild detergent.
Child’s bed
To Next Page
Loading...
